Bridgeport Instruments provides a wide range of low-cost products and solutions for nuclear radiation detection and monitoring.
Our real-time digital signal processors are amongst the smallest, most economic and most easy to use devices on the market.

Our products are ideal for OEM customers who want to embed an instrument core into their system.
Our signal-processing cores are based on a modular firmware framework that can be adapted to work with new sensors and controllers, thus bringing new applications to market quickly.

Family of multichannel analysers with
1 to 4 inputs.

Combined multichannel analyser and PMT-HV unit

• Single channel MCAs
  tinyMorpho  eMorpho  MCA-Base
• 4-channel MCA & DAQ: qMorpho
• Low power: down to 50mW/channel
• Communicate via SPI, USB, Ethernet
• Fast: Up to 16 million counts per second
• Functions: Energy histogram, Oscilloscope, List mode, Pulse shape analysis

• MCA-Base
• Single-channel MCA & HV-generator
• Plugs directly onto PMT
• Powered and controlled via USB
• 12 GPIO, aux. SPI interface
• Non-volatile RAM
• Internal or external temperature sensor

Set of three 3-inch CsI(Na) detectors

Plug-on high voltage and divider for PMT

• Scintillator detectors w/ spectroscopy
• Ionization chambers  
• Pulse readout for ionization chambers
• Recycling integrator for accurate dose measurement.

• Plug-on PMT HV supplies: TwinBase
• In-line PMT HV supplies: NG20
• Powered from 2.5 V to 5.5 V
• Integrated divider
• Low power, high drive strength
• Control via SPI or analog